Recently, many friends asked what should I do if the front and rear blade CNC ceramic tile cutting machine occur tile cracking? What’s the reason, and how to solve it? The following I will answer your question.

   The reason why the front and rear blade CNC ceramic tile cutting machine occur tile cracking:
   1. The cutting blade is stuck: If you start cutting directly, forgetting to open the cutter head motor, or forget to open the water during the operation,the cutting blade will be stuck . If it occur several times, the cutting head no longer perpendicular to the conveyor belt, will have size head and other problem. Therefore, it is necessary to stop the machine and check the cutter head to ensure that the cutter head is perpendicular to the belt surface by 90 degrees.

　2. Too loose head belt: Too loose head belt can also cause ceramic chipping caused by insufficient blade strength during cutting. At this time, adjust the motor and head belt according to the situation.

　3. Spindle bearing damage: If the cutter head sounds abnormal during cutting, stop working and gently shake the cutting blade by hand. If there is looseness, you need to replace the cutter head bearing.

    As the name suggests, the front and rear blade CNC ceramic tile cutting machine adopts a CNC operating system and fully automatic computerized control. You only need to enter the desired size on the control panel, and the cutting baffle will automatically adjust to the specified position. There is no need to manually operate the scale. Solving the problems of labor cost, unskilled operation, slow speed,large diagonal error and size head of ceramic tile deep processing industry.

    HY-1200 front and rear blade CNC ceramic tile cutting, adopts oil-immersed screw structure, the accuracy and life of the ruler are increased by more than half. The biggest feature of the three-blade is that it can be cut in large quantities, and the cutting efficiency is high. The power of the double cutting spindle motor Upgraded to 4KW, the cutting speed can be 35% higher than the traditional CNC cutting machine. The machine is easy to operate and has a high degree of automation. You only need to set the cutting size on the operating plane, and you can quickly set the R and upgrade all the cutter heads to electric lifting head.