The multifunctional ceramic tile cutting machine can be used for straight cutting, 45 degree chamfer, diagonal cutting, grinding round edge, grinding straight edge, slotting, anti-slip grooves (4 anti-slip grooves can be slotted simultaneously), internal 45 degree chamfer, external 45 degree chamfer, Begonia angle and other processing processes, which can realize a variety of functions as one.

  The using method of multifunctional tile cutting machine:

  1. Before using multifunctional tile cutter, check that the power supply voltage shall be within 10% of the rated power. Before switching on the power, the switch shall be in the off state.

  2. Check carefully before use, whether the cutting piece has cracks or damage, and replace it immediately if there is any crack or damage.

  3. Check whether the slice is in working condition, and the cutting can not be started until the bottom plate is not rubbed.

  4. Keep stable working speed, not excessive force, such as sharp decline in blade speed should be reduced feed force, to prevent overload damage to the machine.

  5. It is strictly forbidden to remove the protective cover for cutting.

  6. The cooling water source of saw blade is tap water. Before use, connect the water pipe to tap water, and make sure the water output is suitable.

  Precautions for use of multifunctional ceramic tile cutting machine:

  1. Multi-function tile cutting machine has directivity, and it is forbidden to turn backwards during operation, otherwise, it will cause damage to the machine and personal safety.

  2. When multi-function tile cutting machine is working, the machine body must be grounded and it is strictly forbidden to work off the ground.

  3. After using multifunctional tile cutter, the workbench should be cleaned in time, and the accumulated water and sediment in the water tank should be released after the machine is shut down.

  4. It is strictly forbidden to impact heavy objects on the work table.

  5. When the machine is not used for a long time, it should be stored in a dry and clean place.

  Multi-function ceramic tile cutting machine has the advantages of Oh safety, precision, durability, non edge collapse, easy operation, stable operation,no vibration, low noise and so on. Mainly used for skirting line, stair tiles and inner wall 45 degree V-shaped tiling, dry hanging, various floor tiles, stone interior and exterior wall decoration, etc.