Ceramic tile 45 degree chamfering machine is one of the commonly used equipment for processing ceramic tiles, which has the functions of edge grinding, chamfering, chamfering 45 degree angle, rounding edge and so on. In order to improve the processing efficiency, what should we pay attention to when we use the 45 degree tile chamfering machine?

   Precautions for the use of 45 degree tile chamfering machine：

   1.Circulating water temperature

   In the use of ceramic tile 45 degree chamfering machining, we need to pay attention to the temperature of circulating water should not exceed the maximum bearing degree of the water pipe. If the water temperature is too high, it is easy to cause the deformation of the water pipe, which will damage the water supply system and cause the motor to burn. Therefore, in order to effectively control the circulating water temperature, check the water temperature after a certain period of time.

   2.Wire frame connection

   Because the material of the wire frame connection of the 45 degree ceramic tile trimming machine is made of vulnerable parts, because the production cost of vulnerable parts is relatively low, it is normal to be widely used. In use, operators need to pay great attention. If the wire frame connection adjustment is not good, under the operation of the equipment, if the vibration is large, it will affect the stability of the ceramic tile conveying.

   3. Stability of air pressure

  The working air pressure of the 45 degree tile chamfering machine is not lower than the rated pressure of the system under normal conditions. If the automatic lifting of grinding head is unstable under abnormal air pressure, the effect of chamfering will be uneven. If the impact pressure of the system is higher than the specified working pressure, it will seriously affect the service life of the motor, and even cause accidents.

   In addition to the three points mentioned above, when using the 45 degree tile chamfering machine, it is necessary to check whether the parts of the equipment are complete when starting up. After daily work, it is necessary to clean the equipment and maintain the equipment regularly. Only in this way can the tile processing machinery be used longer and the processing efficiency be better.