Because it is the first time coming into contact with the ceramic tile processing industry for many people, they will have all kinds of questions at the beginning of the factory. The following lists the questions often asked by the newly established ceramic tile processing factory, hoping to help you.

1. What machines and equipment do you need to buy to set up a ceramic tile processing plant?

Just opened a ceramic tile processing plant generally need to buy three sets of equipment: 14 grinding head arc polishing machine, front and rear three blade CNC ceramic tile cutting machine, 1200 type hand push ceramic tile cutting machine , with these three machines have basically met the various needs of the processing plant in the early stage, later processing capacity can consider adding machines.

2. How much does it cost to buy the equipment?

The price of 14 grinding head arc polishing machine is 95000 yuan, the price of front and rear three blade CNC cutting machine is 35000 yuan, and the price of 1200 hand push cutting machine is 5500 yuan. The total cost of these three equipment is about 140000 yuan.

3. How large is the floor area of ceramic tile processing plant?

The equipment covers an area of 70-80 square meters, and space is reserved for stacking tiles and personnel walking, so the plant area needs about 100-300 square meters (the larger the better).

4. How to deal with the circuit problems in the early stage of ceramic tile processing plant?

Connect 380V three-phase four wire industrial power, the power is generally 20-80kw according to the size of the purchased model. In this way, install a distribution box, and the main line of the workshop is 16m2 ×3 + 6m2x1 copper wire and above, 100A air switch, one switch reserved for each machine.

5. How to solve the problem of water consumption in ceramic tile processing plant?

Using tap water, build a pool circulation system to supply water, avoid waste of water resources and sewage discharge, dig a pool of 10-15 cubic meters (3 meters long, 2 meters wide, 1.5 meters deep), and buy a 0.75KW pump with a diameter of 50 mm. After the machine is in place, build a 15 cm high water wall around to prevent the water from running everywhere.

6. What are the special requirements of the factory floor

There are no special requirements for the ground, only the ground is smooth and well paved, and the cement hardened ground is 9-10 cm thick.

For entrepreneurs who do not have any factory opening experience, it is better to find a more reliable one when purchasing equipment. In this way, not only the equipment is easy to use, but also there will be more manufacturers contacted by mechanical processing plants since they have been operating for many years. We can discuss the factory opening plan with them.