Waterjet cutter is a kind of equipment that is widely used. With the continuous development of technology, the newly developed five-axis waterjet has gradually matured and been used by many manufacturers. The waterjet cutter will also encounter some problems during use, such as: after the high-pressure pump is started, the turbocharger reversing changes quickly, but the cutting water pressure is too low,and the oil temperature rises quickly, and sometimes even the accompanying oil pressure can not rise.What should we do? The following editor will share solutions to these problems for you, let's take a look!

　 One, cutting water pressure is low

　　 1. There is a leak in the high-pressure water circuit. Solution: Tighten the leaking joint or replace the leaking piping components.

　　 2. Insufficient water supply. Solution: Check whether the water supply valve is not opened or the water supply pressure is too low.

　　 3. The oil seal of the turbocharger oil piston is damaged and leaks oil. Solution: Insufficient flow of working hydraulic oil, slow reversing of the turbocharger, low cutting water pressure, and replace the oil piston oil seal.

　　 4. The jewel nozzle is damaged, and the water output is too large. Solution: The gem nozzle needs to be replaced.

     Two, the oil temperature rises too fast

　　 1. The oil temperature rises quickly and the oil pressure cannot rise. Solution: Mainly check whether the internal leakage of the oil pump is too large, whether the internal leakage of the electro-hydraulic directional valve is too large, whether there are foreign objects in the safety valve and overflow valve in the oil circuit, touch the above parts with your hands to see if it is hot.

　　 2. The oil temperature rises rapidly, but the oil pressure and the supercharger reverse normally. Solution: If the displacement of the oil pump is too large, reduce the displacement of the oil pump through the handle, and pay attention to check whether the oil refrigeration equipment is working properly.

   When any of the above situations occurs, the machine should be stopped immediately, and the machine can be operated again after inspection and maintenance. If you want to know more about the waterjet cutter, you can also consult our online customer service.

    For more information click our official website：Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hanistay@foxmail.com)