Waterjet cutter is widely used in modern decoration industry, mainly used for parquet,mosaic, cutting and so on. What should I do if there is uneven reversal on both sides of the turbocharger during work, and one side reverses faster than the other side? The following editor will share with you.

　　What should I do if the stroke of the turbocharger of the waterjet cutter is unstable?

　　1. There is leakage on one side of the one-way valve. Solution: The valve core and valve pad can be removed and ground. If necessary, replace the valve core and valve pad, and reinstall the one-way valve. The best way is to repair or replace all parts of the one-way valve.

　　2. Impurities enter between the one-way valve core and the valve pad. Solution: Remove the end cover, remove the pollution source, avoid the problem from recurring, carefully check the one-way valve, and remove any impurities. If necessary, re-maintain the check valve, clean all parts and reassemble.

　　 3. The reversing drive cable or related parts are worn or bent (mechanical reversing). Solution: Remove the reversing drive cable, install spare parts, and check again, and replace any worn parts

　　 4. The high-pressure water plunger is separated from the hydraulic piston. Solution: reduce the water pressure and water flow to prevent the supercharger from continuing to operate under this condition, which would seriously damage the supercharger. Remove the hydraulic cylinder and piston, and replace the damaged parts.

　　 5. The direction of the water outlet check valve core is reversed. Solution: Disassemble the water outlet check valve body, take out the check valve core, and reinstall it in the correct direction.

     After waterjet cutting, secondary processing is not required or easy, safe, environmentally friendly, faster, and more efficient. It can realize cutting processing of any curve, convenient and flexible, and has a wide range of uses. It is a mature cutting process with good applicability for modern machinery. For more information click our official website：Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hanistay@foxmail.com)