In this era of rapid development of science and technology, ceramic tile cutting machine is a kind of more energy-efficient ceramic tile processing equipment, which is widely used in the industry. Mechanical failure is a problem that may be encountered in production and use, which has a great impact on production efficiency and effect. So what's the reason that the ceramic tile cutting machine doesn't work?

     Causes and repair methods:

    1. The power supply is blocked, the connector is loose, and the power cord is broken. Repair or replace the power cord in time.

    2. If the brush is too short, replace it in time.

    3. Check whether the power switch is damaged, if so, replace it immediately.

    4. If the stator winding is burnt out, repair or replace the stator winding in time.

    5. If the rotor winding is burnt out, replace the rotor

   6. Too much propulsive force caused the switch to trip. Turn off the power and restart after a rest of 5 minutes.

    Matters needing attention and using skills of ceramic tile cutting machine:

    1. When cutting, drag the "handle" backward to the highest control position to avoid collision between  the blade and the ceramic tile, otherwise, the blade will not be used due to defect.

    2. For antique or other uneven surface tiles, please replace the cutter head! The ceramic tile with rough and astringent surface will shorten the service life of the blade.

    3. Do not use the blade to press the broken brick during operation.

   4. When cutting, first pull the pull rod to the back end, let the blade gently press on the ceramic tile, push forward along the main axis to the front control groove, put the presser foot on the ceramic tile, gently hit the end of the push-pull handle, and the ceramic tile will break with the knife mark.

    Foshan Nanhai Hongyun Ceramic Machinery Co., Ltd is a 14-year-old brand manufacturer focusing on manufacturing all kinds of ceramic tile processing equipment. It integrates sales, after-sales and installation, and serves every customer in the whole process, one-to-one door installation, guidance and training of operation technology. The real realization of the direct from the factory to the customer's hand, the middle does not go through any dealer link, greatly saving the purchase cost for customers.