Generally, when purchase a automatic tile cutter, the manufacturer will send a professional operator to the door for training, but due to the limited training time, some essentials cannot be remembered, resulting in not only unsatisfactory effects of the cut products, but also easy damage to the mechanical parts.Now the editor will take everyone to understand the operating specifications of the tile cutter.

Operation skills of tile cutter:

　　 1. If there is a gap between the tile and the bottom tile due to uneven cutting of the tiles, you can put a piece of paper of appropriate thickness between them to avoid corners.

　　2. Replace the appropriate saw blade: the larger the diameter of the saw blade, the better the silicon carbide content. The coarse sand type is better than the fine sand type, and the higher the motor speed, the better. The cutting blade is recommended to use a saw blade of 130*20mm.

　　 3. Appropriately reduce the cutting speed, 1 m/min is recommended. Push the cutter platen forward with both hands at a constant speed to cut. When the contact point between the cut piece and the brick tail is 10-20mm, the advancing speed must be slowed down to control the collapse angle. Do not press the brick with both hands when pushing the brick.

　　4. The bottom of the brick should be leveled; add water to cool when cutting; the direction is to cut back (the same as the rotation direction of the cut piece. The technique should be straight, not swinging left and right, and the cutting speed should be slow and uniform; in the cutting process, the cutter should not press the bricks, but should follow the strength.

　　 5. Pay attention to the position of the saw blade and control the speed of the cutting product during the cutting process, and take self-protection measures to prevent cuts.

　　6. In the cutting process, the debris of the product must be washed with water, and it is strictly forbidden to clean it by hand.

　　7. When cutting, keep a distance of more than 10mm between the hand and the cutting piece to prevent the cutting piece from hurting the hand.

　　 8. During the cutting process, properly control the cutting speed. It should be slow when cutting, but it can be faster in the middle. When closing the blade, it must be closed slowly to prevent dropping corners.

        The ceramic tile cutter has the advantages of high cutting efficiency, fast speed, no edge collapse, etc. It is mainly used for ceramic tile cutting, production of step/stair tiles, floor/skirting tiles, marble and other stone tile processing, etc. The application is very wide.

         For more information click our official website：Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hanistay@foxmail.com)