Multifunctional tile cutting and edging machine is a multi-purpose tile processing equipment in the tile processing industry, which has the functions of cutting, edging, chamfering, polishing and so on. Compared with traditional tile equipment, it has the advantage of high processing efficiency. However, if you do not pay attention to maintenance when using the multifunctional tile cutting and edging machine, let it be kept in overload work, which will not only reduce the processing efficiency of the machine, but also seriously shorten the service life of the equipment, how to maintain it when using the multifunctional tile cutting and edging machine? What needs to be done? Let's take you to find out.

  Maintenance skills of multifunctional tile cutting and edging machine:

　　 1. The operation of the multi-functional tile cutting and edging machine should be carried out in strict accordance with the operating procedures provided by the machinery manufacturer.

　　 2. Regularly check whether the conveyor belt, handles, knobs and buttons of the multifunctional tile cutting and edging machine are damaged. If it is severely worn, replace it in time and submit spare parts for supplement.

　　3. Regularly inspect and repair the switch, insurance and handle of the multifunctional tile cutting and edging machine to ensure the smooth operation of the equipment.

　　4. The machine should be lubricated and scrubbed for 10 minutes after the end of the work day to keep the multifunctional tile cutting and edging machine clean.

　　 5. It is forbidden for non-designated personnel to operate the equipment. If the operator wants to leave while operating the machinery, he must turn off the equipment before leaving.

　　 6. Before the multifunctional tile cutting and edging machine is started, lubricating oil should be added regularly, fixedly, and quantitatively according to the requirements of the lubrication chart. The lubricating oil should be clean and free of precipitation.

　　7. The multifunctional tile cutting and edging machine should always be kept clean, and the unpainted parts should be protected from rust and grease.

　　8. The lubrication spilled oil in the motor bearing should be replaced and refilled regularly, and the electrical part should be checked for normal, safe and reliable operation.

　 The above introduces the maintenance methods of the multifunctional tile cutting and edging machine. If you encounter more difficult problems in the use of mechanical equipment, you can contact the equipment vendor for assistance.For more information click our official website:Foshan nanhai hongyun ceramic machinery company.If you are interested in our machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hymachinery00@gmail.com)