The process operation of the rock slab processing equipment mainly includes verification (mainly checking the drawing, the color of the plate and the size to be cut, etc.), cutting, chamfering, bonding, and if processing a bathtub , also need to open a hole. The details are as follows introduce.

　　The processing method and procedure of the rock slab processing equipment

　　1. After the buyer places an order, carefully check the dimensions to be processed on the drawings before production, and then transfer the rock slab plates from the warehouse for later processing.

　　 2. Cutting

　　 Next, the plate is lifted to the cutting table of the rock slab processing equipment, and the high-hardness rock slab can be perfectly cut into various sizes of plates, which can be cut with a rock slab cutting machine or a waterjet cutting machine. Waterjet cutting technology is a modern cutting technology with multiple functions and perfect performance. It can realize the characteristics of no thermal deformation, smooth cutting, dust-free and pollution-free, and reduce the waste of materials in the cutting process. The cut rock slab is flat and smooth.

　　3. Opening

　　 AC five-axis waterjet will be used to drill rock slabs. The equipment can be used to dig holes in the cut rock slab, and can dig round, irregular, polygonal, etc. Or according to the different shapes of the processing drawings. In the processing of rock table, wash basin, and bathroom cabinet, it is necessary to make holes on the surface of rock slab surface. With the help of professional tools, large rock slabs can be used to make square holes, round holes, etc. Complex holes can be completed with the help of precision CNC or waterjet processing equipment. Regardless of whether it is a square hole or a round hole in the rock slab, an arc of 3 to 5 milliseconds needs to be left in the hole. In addition to aesthetics, rounded corners can also increase the load-bearing capacity of the panel. Any hole corners without rounded corners will create stress points on the panel.

　　 4. Chamfer

　　Using the cutting board made in the front, dig out boards of different shapes to assemble. When encountering a corner, use a rock slab 45-degree cutting and chamfering machine to chamfer the inner 45-degree angle for seamless splicing. If you need to edging, you can also use a rock slab 45-degree cutting and chamfering machine for edging. After completion, you can assemble it according to the drawings. Chamfering is a highly technically demanding process. With the help of professional cutting and grinding equipment, no chipping can be achieved and the cut is straight. Chamfer grinding can not only make the stone slab more beautiful, but also remove burrs and increase the safety of the finished stone slab.

　　 5. Bonding

　　In complex applications, if it is not possible to cut and shape the sheet directly, it may be necessary to bond it. The bonding of rock slabs requires the use of professional adhesives. Mix tap water and adhesive according to the ratio of 1:4. After mixing the uniform adhesive with a dusting knife, the adhesive will fall off the dusting knife in about 5 seconds. At this time, the viscosity of the adhesive is the best. After preparing the adhesive, let it stand for 5-10 minutes. The thickness of the adhesive depends on the size of the surface material.

　　 The above is an introduction to the processing flow of the rock slab processing equipment, I hope it will be helpful to everyone.