When the porcelain tile processing machine is maintained, it is necessary to clean the equipment according to the correct method of the machine given by the manufacturer. In daily applications, frequent cleaning of the machine can make it more durable. Due to the different cleaning methods of different parts, you need to pay special attention to which parts can be cleaned with water and which parts cannot be cleaned with water. The following describes the cleaning method of the machine and the parts that need to be cleaned.

　　 1. After the porcelain tile processing machine is completed, the water pipe and sink of the machine should be cleaned immediately. Since the sewage generated by the porcelain tile processing machine equipment will flow into the water tank along the water pipe, it needs to be cleaned to avoid being blocked by the water pipe.

　　 2. The electrical system and frequency conversion system of porcelain tile processing machines cannot be cleaned with water. This will damage the circuit. Check for dust. If there is dust, wipe it with a dry cloth or spray it with an air jet if necessary.

　　3. Clean the blades, grinding wheels, abrasive tools and other consumables of the porcelain tile processing machine and put them back in place. Before starting the porcelain tile processing machine, let the machine idling for a period of time to remove the residual water in the machine.

　　4. Generally, the bearings of porcelain tile processing machines are cleaned every six months. When cleaning, apply a layer of oil on the bearing shaft, and then inject new lubricating oil into the bearing. When maintaining the gear motor of the porcelain tile processing machine, please protect the internal structure of the motor.

　　Cleaning porcelain tile processing machine is a meticulous job. It must be cleaned carefully and the cleaning time should be recorded. Since the machine is working every day, it is easy to accumulate dust inside, so it needs to be cleaned. In order to ensure the continuous cleaning of porcelain tile processing machine equipment.