In the cutting and processing industries of glass, stone, ceramics, etc., the traditional method is to use diamond tools for cutting, sawing, milling, etc. The cutting thickness range is very large and the speed is relatively fast. But for general thickness,waterjet cutting can realize the cutting process of any curve, the yield rate is high, the production cost is reduced, and the added value of the processed product is greatly improved. Since the water jet is relatively new, many friends still don’t know how to operate it. What should we pay attention to during the operation of a waterjet cutter? The following I will give you a brief explanation.

　　 1. The sand nozzle is rubbed for a long time, and one side will wear out after a period of use. It can be rotated at an angle to continue using it, which can greatly increase the service life of the sand nozzle.

　　 2. In order to prevent water leakage when the steel pipe is connected, the thread of the steel pipe head must be three teeth higher than the thread pad.

　　 3. If it is impossible to determine whether the problem lies in the water circuit or the oil circuit when the fault occurs, the water circuit can be partially cut off (the high-pressure cylinder will be cut off later), and then turn on the oil pump and high-pressure water switch to observe whether the cylinder piston changes normally. Determine whether the problem is a water circuit failure or an oil circuit failure.

　　 4. Where there is a sealing ring on the turbocharger, lubricating grease must be added during installation.

　　 5. All threaded joints on the turbocharger need to be painted with blue oil to prevent the threads from being killed.

　　 6. The best cutting height between the cutting head and the workpiece is 5-7 mm.

　　7. Reduce the temperature of the supercharger as much as possible, which can greatly extend the service life of the sealing ring and reduce the cost.

　  Newly purchased waterjet cutters will generally have professional on-site training until the operators have mastered various operating skills and simple troubleshooting methods. In normal use, we should also pay attention to regular inspection of various parts for serious damage.

        For more information click our official website：Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hanistay@foxmail.com)