Waterjet cutter is a machine that uses high-pressure water to cut. Under the control of the computer, the workpiece can be sculpted at will, and it is not affected by the texture of the material. It’s a processing equipment that is widely used in modern technology. Almost all materials can be cut. If the hydraulic oil of the waterjet cutter contains metal impurities, there are usually abnormal noises in the oil pump or booster. What should I do at that time? What is the solution?

   AC five-axis waterjet cutter can be used to cut the sintered stone at an angle of 45 degrees to achieve seamless splicing; and the original German imported laser scanner is hung on the cutting spindle, and the large-size plate is scanned and positioned before cutting It can ensure that the high-precision processing of waterjet cutting requires a five-axis waterjet. The advantage of the five-axis waterjet is that the cutting plane is perfect, and it can cut and process various complex process drawings.

　How to deal with metal impurities in hydraulic oil of waterjet cutter?

　1. The low pressure cylinder of the turbocharger is seriously worn

　The hydraulic system is overheated, the operation stroke is unstable, the noise is abnormal during operation, the capacity of the booster drops suddenly, and the output water pressure fluctuates seriously. Solution: disassemble the booster, check all parts, replace all worn parts, check the pipeline, disassemble and clean it thoroughly, then re-add the hydraulic oil system, replace the oil tank filter, replace the oil filter, and reinstall the booster.

　2. the oil pump is severely worn

　The hydraulic oil pump is damaged, the noise is higher than normal, and the oil pressure cannot be maintained or the water pressure is lost. Solution: Disassemble and thoroughly clean the hydraulic oil system, and replace the hydraulic oil pump.

      3. Use the wrong oil. Solution: Replace with suitable engine oil.

　When the above two situations occur, the operation of the machine should be stopped immediately, and the operation can be performed again after inspection and repair. If you want to know more about the waterjet cutter, you can also consult our online customer service.For more information click our official website：Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hanistay@foxmail.com)