The multifunctional ceramic tile cutting machine is mainly used for ceramic tile cutting, edge grinding (straight edge, round edge), 45 °Chamfering, slotting (3 grooves can be opened at one time), dry hanging and other functions. It is suitable for ceramic tile shops, construction sites, decoration companies, ceramic distribution shops, ceramic tile processing plants, etc.

Although multifunctional ceramic tile cutting machine has many functions, it still needs to pay attention to some safe operation skills in the process of daily operation. Let's take you to know.

1. The machine must be installed with grounding protection and leakage protector, otherwise it is strictly forbidden to use electricity.

2. When the multifunctional ceramic tile cutting machine works, it is forbidden to operate without water, and the protective cover must be covered to prevent injury.

3. When the multifunctional ceramic tile cutting machine cuts, the feeding is slow and the blade is slow.

4. When chamfering the multi-functional ceramic tile cutting machine, loosen the two rotary fixed screws and lock the rotary screws.

5. When the multifunctional ceramic tile cutting machine is slotting, loosen the two fixed screws of the rotary head, rotate the cutter head, install the slotting wheel, and lock the screws to work.

6. When the multi-functional ceramic tile cutting machine slots the grooves, take off the blade and replace it with the diamond forming grinding wheel.

7. In the working process of multi-functional ceramic tile cutting machine, it is strictly forbidden to loosen the rotating head screw, so as to avoid accidents.

8. The lubricating parts of the designated parts shall be lubricated in strict accordance with the regulations, and oil shall be added once a day. Because the working environment is in water, sand and stone powder, it is particularly important to maintain lubrication.

9. Check whether the protective cover is in good condition, and strictly prevent water and sand from entering the guide rail.

10. After work, clean the machine and cut off the power.

In the daily operation process of multi-functional ceramic tile cutting machine, in addition to the need to be familiar with certain operating skills, but also have to deal with mechanical failure technology, in the process of work, and we need to pay attention to the abnormal equipment.