Waterjet cutters are widely used, ranging from craft accessories to large aerospace industries that they cannot process and cut. No matter what machine is working for a long time, various small problems will appear. It will become more and more troublesome when it is not dealt with at the beginning. For example, many friends recently asked about the slow cutting speed of the waterjet cutter. Check that the pressure of the booster is normal. But the number of commutations is small, and the oil pressure and high-pressure water are normal, only the cutting speed cannot be increased. So how to solve this kind of problem on the waterjet? The following editor will share with you the solution to the slow speed of waterjet cutter.

　1. The sand pipe is blocked. Solution: Sometimes the inner hole of the sand pipe is partially blocked by impurities, resulting in low water flow and slow cutting. You can install the sand pipe up and down and use high pressure to flush.

　2. The high-pressure pipeline is blocked. Solution: The two ends of the high-pressure pipeline can be removed and assembled, and the high-pressure flush can be used.

　3. The high-pressure cutting water flow is too small. Solution: Check whether the high-pressure pipe lines and components are blocked, remove any obstructions, check whether the on-off valve is operating normally, and replace the on-off valve if necessary.

　4. The water switch is faulty. Solution: If the water switch is blocked or cannot be fully opened due to other problems, the water flow rate of water cutting will be small. At this time, you need to check whether the on-off valve is operating normally, and replace the on-off valve if necessary.

    If the waterjet cutter has the above conditions, it will cause the cutting speed to be too slow and the number of times of supercharger conversion is small. When operating the machinery, you must first follow the procedures, and secondly, check whether the parts of the equipment are old or damaged regularly, oil the bearing shafts regularly, and replace the damaged parts in time.

     For more information click our official website：Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hanistay@foxmail.com)