Since the ceramic tile cutter is not a disposable product and works in a harsh environment every day, if the service life can be effectively extended, it will greatly reduce the processing cost, so how to extend the service life of the tile cutter? What do I need to pay attention to?

　　The precautions for extending the life of the tile cutter

　　 1. Cleaning and maintenance

　　Because the machine tool guide rail is a high-precision core component, after each work is completed, it must be wiped clean, kept clean and lubricated; all bearings should be regularly oiled to make the transmission flexible, ensure processing accuracy, and extend the service life of the ceramic tile processing equipment.

　　 2. Replace the saw blade

　　Because the blunt saw blade will damage the motor and affect the cutting quality and efficiency of the machine, when the cutting blade is blunt, it should be replaced in time or sharpened before reinstalling.

　　3. Engine

　　The motor of the cutting machine is the power source of the cutting machine, and the motor will continue to wear during use. When the motor reaches the critical point of destruction, the motor should be replaced.

　　4. Fastening of screws

　　After the tile cutter has been working for a period of time, the screws at the rotating joint may loosen, which will affect the stability of the machine. Maintenance method: use the attached tools to tighten the screws one by one. Maintenance period: about one month.

　　5. the cooling water should be unblocked

　　 Whether using tap water or circulating water pumps, the water flow must be kept unblocked. After each use, clean the pump pipe and filter cotton with clean water to ensure that the pipe is unblocked. If the water pump cannot drain normally, please contact the supplier immediately for replacement. The tile cutter cannot be processed without water.

         In order to effectively extend the service life of the ceramic tile cutting machine, in addition to the six points described above, the correct operation procedure should be followed during operation. The equipment should be cleaned in time after work every day and maintained regularly. Only the tile cutter can be more durable, and the effect of the processed plate is also good.For more information click our official website:Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hymachinery00@gmail.com)