Various problems will appear after the sintered stone machine have been used for a long time. At this time, the overall service life of the equipment can only be extended by replacing the damaged or about to be damaged parts. By maintaining the service life of the equipment parts, it can also reduce the production costs and achieve the purpose of extending the overall service life of the machine.

　　With the use of the machine, some screws will become loose during vibration and movement, especially the screws at the joints of various components. For example, if the screws at the joint between the cutting head and the cutting table are loose, vibrations may occur during the cutting process, resulting in poor cutting results, burrs, edge bursts, gaps, etc.; another example is the loosening of the screws of the pressure plate or the pressure roller, resulting in tiles slipping during the cutting process seriously affects the cutting efficiency; or the screw of the ruler is loosened, which affects the alignment of the cutting direction of the tiles, causing the straight edges to be cut into beveled edges, etc. Therefore, pay attention to the condition of the equipment screws in daily maintenance.

　　 General equipment uses circulating water as a cooling method when cutting. The circulating water flows on the saw blade and the material for cooling, while taking away most of the dust generated by the cutting. However, a small amount of dust remains and adheres to the equipment's cutting head, cutting platform, and platform moving guide rails, forming deposits and dirt over time. These deposits are uneven during the formation process, which will hinder the rotation of the cutting saw blade, resulting in uneven cutting table surface, jamming on the guide rail. Therefore, in daily maintenance, should pay attention to remove dust and dirt accumulated on the equipment.

　　 After the above two points of maintenance are completed, it is necessary to refuel the gears, chains, heads and other parts. In the equipment, the parts can be lubricated to reduce the loss, make the equipment use more smoothly, and prevent these parts from being directly exposed to the air to rust.

　　The maintenance of equipment is also closely related to the environment. After completing the above maintenance measures, if you do not use the machine for a long time, you need to store the equipment in a dry and clean place, which can effectively prevent the equipment from rusting without being used for a long time.For more information click our official website:Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hymachinery00@gmail.com)