In fact, not all equipment requires the machinery dealer to send someone to install the machinery. Generally speaking, large-scale equipment with a higher degree of automation needs to be installed by personnel. For equipment with a low or normal degree of automation, such as a series of multi-function or CNC hand-push sintered stone machinery, customers can complete the equipment by themselves only according to the specifications of the equipment, relying on their own experience or calling the after-sales personnel of the machinery business In this way, the preparation time required for the equipment to be put into production is greatly reduced.

　　 For equipment with a high degree of automation, the machinery business will send a special person to install and debug the equipment for the customer, guide the customer to use the equipment, and answer some questions for the customer. Of course, if the customer refuses this service, he can also install and debug the equipment by himself, but the following points need to be paid attention to when installing the sintered stone processing equipment:

　　 1. When installing the equipment, do not operate in thunderstorms, but in sunny and dry weather to avoid accidents caused by lightning strikes. At the same time, it is necessary to configure a separate power supply for the device, which cannot be connected in parallel with other device power supplies. Otherwise, the power supply cannot meet the equipment requirements and the equipment may be burned. And the power supply should be set in a reasonable location, not in a humid place near the water source.

　　2. When installing the equipment, remember to install it step by step according to the instructions, do not carry it or operate it violently to avoid damage to the equipment.

　　 3. When installing the equipment, you need to choose a flat ground for installation and fix the equipment. If the ground is not level, find a way to level the ground. If the ground on which the equipment is placed is uneven, vibration is likely to occur when the equipment is used, which will seriously affect the processing effect and efficiency of the equipment.

　　 4. After the installation is complete,the equipment needs to be debugged. Generally, waste plates are used to test the performance of the equipment to see if the equipment can process materials as required.

　　 In addition to the quality of equipment, customers who purchase equipment pay more attention to post-purchase services, such as equipment installation and commissioning services. Many customers tend to have better service manufacturers when purchasing equipment, which can save a lot of trouble for subsequent production.

       For more information click our official website:Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hymachinery00@gmail.com)