Manual tile cutting blade are generally used on manual tile cutters. Because they are manually operated, adopts wet cutting,they will not generate a large amount of dust, have little noise, have high precision, and are simple to operate. Then how does the manual tile cutter cut beveled edges?

　　 1. Determine the required bevel angle and length, draw the angle line and then cut.

　　2. Start cutting from the side that needs to be kept more, so that the sense of obstruction can be minimized.

　　3. In order to ensure a more accurate angle, it is best to cut in multiple times. When adjusting the bevel side to the ruler, press the material tightly against the ruler and push it out along the ruler.

　　4. When the first one is cut out to reach the required angle, completely fix the hypotenuse by the ruler, and repeat the previous points to start the subsequent cutting.

How to use manual tile cutter:

　　 1. When cutting, drag the "handle" backward to lift it to the highest control position to avoid collision between the blade and the tiles, otherwise, the blade will not be used due to defects.

　　 2. For antique or other uneven tiles, please replace the cutter head! Rough tiles will shorten the life of the blade.

　　 3. Do not use the blade to press and break bricks during operation.

        4. When cutting, first pull the push-pull rod to the back end, let the blade lightly press on the tile, push forward along the main shaft to the front control groove, place the presser foot on the tile, and tap the end of the push-pull handle lightly. , The tile can be broken with the knife mark.

　　In the cutting process, when the cutting line of the blade mark becomes thinner and shallower, the shape of the brick edge cracked by the pressure of the tile will be more positive and beautiful. On the contrary, the deeper and thicker the blade mark line, the more oblique and crooked the shape of the bottom of the brick with the split edge. In severe cases, it may even look like a jagged shape. Therefore, the force must be light when pushing. There will be a phenomenon of jumping corners.