The ceramic tile processing equipment is a ceramic tile processing tool, which can cut, chamfer, polish ceramic tiles. It can process effectivly and save processing costs. Due to the different operating methods of ceramic tile processing equipment, The following is to explain the use method of double-blade continuous cutting machine.

Double blade continuous cutting machine tutorial

1. Use notched blades for cutting ceramic tiles, and use unnotched blades for slotting (the whole piece of circular blade)

2. About 10-20 blades can be installed in one cutting, 11-21 pieces bricks can be cut out. Generally, the bricks are cut into strips first.

3. When cutting, you need to install the first set of blades first, and then install the second set of blades. The number of double sets of blades should be the same. The front set of blades should be in a straight line with the back set of blades.In this way, there will be no step shape when cutting. If the blades are not aligned, it will cause some problems, such as: cutting step shape, cutting size is wrong, easy to jam, easy to cut the whole brick, and may cause mechanical trips, etc.

4. The double-group blade continuous cutting machine is more cost-effective for batch processing. If the processing volume is small, the chance of idleness may be greater. In addition, the boot power is relatively large. If it is not for batch processing, it is not cost-effective, because the blade The cost is relatively high, so it is very cost-effective to buy this machine for mass processing.

5. The double-blade continuous cutting machine can process the tile mosaic faster, and it has the function of pre-cutting. Untill the last blade it cut off, so the cutting effect will be better.

The double-blade continuous cutting machine is our company's latest product, which is suitable for cutting foundation line, mosaic, ancient building tile and other types of plates. It has high cutting efficiency and strong stability. It is truly multi-purpose. The range of cutting discs can be installed: 180~300mm.The cutting spindle adopts water cooling to cool down, which makes the spindle more wear-resistant. The machine runs fully automatically, which greatly saves labor. It is one of the most popular products for ceramic and stone deep processing enterprises.

FOSHAN NANHAI HONGYUN CERAMIC MACHNERY CO.,LTD

TEL:+86 18666532535

Email:hanistay@foxmail.com