Ceramic tile beveling machine is one of the more commonly used equipment in ceramic tile processing. It has the functions of beveling internal angles, 45-degree beveling, cutting, trimming, and grooving. It is mainly used for processing step tiles, skirting tiles and other ceramic processing industries. But not only does it have been operated for a long time or used, but no matter what kind of machine it is, there will be failures. Compared with the ceramic tile beveling machine, which failures are more likely to occur? The following will introduce to you what failures generally occur in tile beveling machines.

　  1. Motor: This is because the machine has been working and the temperature of the motor continues to be too high, resulting in damage to the motor. When running for a long time, the lubricating oil in the bearing will dry out, and dirt will accumulate in the bearing, which will overload the motor and cause the motor to malfunction.

　　2. Water screen: On the one hand, this failure is due to the long time that the water screen is not cleaned, causing the water pipe of the circulating water system to be blocked. In addition, because there is no timely cooling water, the motor is damaged due to poor cooling.

　　3. Rotator: The reason is that the transmission belt is slipping due to excessive rotation.

　 4. beveling wheel: If the tile beveling effect is not good, check whether the beveling wheel is complete. The beveling wheel of the ceramic tile beveling machine should ensure the same clearance, and the edging wheel should be replaced in time.

　 5. Filter cartridge: This may be due to the accumulation of dust, which has not been cleaned up in time, and the filter cartridge is not tight.

　If you encounter the above problems, first cut off the power supply and report to the superior for maintenance before you can operate again. When operating a ceramic tile cutting machine, you must be trained and mastered to operate the operation process. Before working, check whether the mechanical parts are normal. After the cutting machine is started, the operator must not leave the job without authorization, and must shut down and cut off the power when leaving. Clean up the machine and the sanitation on the ground in time after the work.For more imformatiom,please contact Whatsapp: +86 152 7835 3800; Email: hanistay@foxmail.com