sintered stone 45 degree bevelingg machine is specially developed by our factory for seamless beveling of sintered stones. It is one of the indispensable processing equipment for sintered stone processing plants. It is suitable for a wide range of scenes such as sintered stone cabinet countertops, bathroom, background wall and so on.

        Since the 45-degree sintered stone bevelingg machine is a relatively advanced equipment, it runs fully automatically during the processing. For this type of automatic processing machinery, some skills are required during the operation. The following is an introduction to the precautions for safe operation of sintered stone 45 degree bevelingg machine.

　　 The safe operation method of the 45 degree sintered stone bevelingg machine:

　　 1. Before work, the oil should be filled strictly in accordance with the lubrication regulations, the oil volume of the sintered stone bevelingg machine should be kept appropriate, the oil path should be unblocked, and the visibility of the oil mark, oil cup, and linoleum should be paid attention to.

　　2. Check whether the operating handles in the safety devices and electrical appliances are safe, reliable, and flexible. The machine is idling for about 5 minutes, and it can be used after confirming that it is intact.

　　 3. After the machine is started, the operator should always pay attention to the operation of each part. If there is any abnormal noise, temperature rise and lubrication, stop immediately and troubleshoot.

　　4. After work, you must clean the equipment, do the daily maintenance of the bevelingg machine, put all kinds of handles (switches) in the neutral position (zero position), cut off the power, and make it tidy, clean, lubricated and safe.

       5. Correctly adjust the height of the worktable, correctly install and adjust the tool, make the top of the iron blade 0.1-0.2mm away from the tooth root of the workpiece, tighten and fix it, choose the cutting parameters reasonably, try to cut one tooth, continue to work after it is qualified, and check frequently Whether the tool is tight and the wear of the grinding head.

　　Sintered stone 45 degree bevelingg machine use precautions:

　　When using the sintered stone bevelingg machine, you should first pay attention to the temperature of the circulating water. The temperature of the circulating water should not exceed the tolerance of the water pipe. Then there is the connection of the wire frame. When using the sintered stone bevelingg machine, the operator must pay attention to the adjustment of the wire frame. If the wire frame connection is not adjusted well, the vibration of the equipment will affect the stability of the tile conveying. The last is the air pressure. The air pressure when the sintered stone bevelingg machine is working is not lower than the rated pressure of the system under normal conditions. If the grinding head automatically rises and falls under abnormal air pressure and is unstable, the bevelingg effect will be uneven.

      Hongyun sintered stone 45-degree bevelingg machine can automatically run beveling while placing the slab, without manual bevelingg, which reduces labor and improves product quality. No foundation construction is required. The whole machine can be used directly. The machine can be used directly from 15-45 degrees. Seam and chamfer, no cracking, no size head, truly seamless splicing, and can also support personalized customization, can customize processing equipment with different functions according to different needs.