As machinery gradually enters the high-tech era, many ceramic tile processing equipment are gradually applied to major industries, although high-tech products can bring higher efficiency to our work. But at the same time, it also has certain requirements for the operator. Let's understand the operation method of the automatic beveling machine first.

　　Operation method of automatic beveling machine:

　　1. Battery: The switch must be kept intact and undamaged. Work start: connect external battery → turn on the equipment battery switch → equipment battery start switch. Shut down after working: turn off the beveling wheel → turn off the battery switch of the device → disconnect the external battery.

　　2. When the beveling machine is working, if you encounter an emergency, you should immediately turn off the main power switch.

　　 3. When the tile beveling machine is working automatically, it is forbidden to open the protective cover and put your head into the protective cover. When working in semi-automatic mode, you must first press the pause button and take the film when the working arm is fully raised to avoid crushing the hand by the working arm.

　　 4. It is forbidden to connect and pull wires randomly, and the power switch socket must be installed on the wall. So that when cleaning or cleaning the equipment, it can effectively prevent water from splashing on the battery and causing a short circuit.

　　 5. When the beveling machine is working, non-workers should be prohibited from entering the work area or playing around the work area without authorization.

　　 6. When replacing the chamfered sand wheel and the waterproof port, the beveling wheel must be stopped first to avoid accidents. It is strictly forbidden for non-workers to open the protective cover to replace the beveling wheel.

　　7. Keep the ground on site clean and tidy at all times. Don’t put anything indiscriminately. Remember to turn off the main switch of “water, electricity, and gas” before leaving get off work.

　　 8. The location of fire-fighting equipment is reasonable, and the staff must master its operation methods and regularly check whether it is in good condition and whether it is out of date.

　　At present, the beveling machine of Foshan Hongyun Ceramics Machinery Factory includes automatic beveling machine, automatic 3200 multifunctional sintered stone slab beveling machine, 6-head beveling machine, automatic double-head beveling machine and so on. If you have the intention to replace the ceramic tile beveling machine recently, please contact our online customer service for quotation and understand the related content of the beveling machine, or you can come to our company for inspection.

     For more information click our official website：Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hanistay@foxmail.com)