In the process of using ceramic tile processing machinery and equipment, due to the impurities generated in the cutting and edging process, a layer of stains will be left on the surface of the equipment, which affects the use of ceramic tile processing machinery and equipment. The ceramic tile edge grinding machine is an efficient ceramic tile processing equipment. In use, due to the high edging strength, the flying debris tends to adhere to the surface of the tile edging machine. Over time, the accumulation of stains will greatly affect the processing effect of the ceramic tile edge grinding machine. So, how should the ceramic tile edge grinding be cleaned after being used for a long time?

1. Before cleaning, be sure to turn off the power of the ceramic tile processing machinery to ensure that the equipment is clean and has no electricity;

2. In the process of mechanical cleaning, a non-metallic hammer can be used to hit the oil pipe continuously or intermittently to facilitate the removal of attachments in the pipe;

3. Generally, hydraulic oil or working test oil is often used when cleaning the ceramic tile edge grinding machine. Do not use kerosene, gasoline, alcohol, steam or other liquids to prevent corrosion of hydraulic components, pipes, fuel tanks and seals. The cleaning time is generally 48-60 hours, which is determined according to the complexity of the system, the requirements of filtration accuracy and the degree of pollution;

4. In order to prevent corrosion caused by external moisture, the hydraulic pump should continue to run until the temperature returns to normal after cleaning. After cleaning, clean the clean oil in the circuit.

Daily maintenance of ceramic tile processing machinery:

After each use, the machine should be wiped clean, the power cord should be checked for damage before operation, and the moving parts such as the grinding wheel should be lubricated once a month. After each use, the cleaning staff should record in the "Machine and Equipment Maintenance Order" on the day The state of use of the machine and the head of the cleaning department should check the work records of the cleaners before leaving get off work every day. If the machine is abnormal, immediately fill in a repair form, send it to the warehouse for repair and make a record.

The requirements for the use and maintenance of ceramic tile processing machinery during the running-in period can be summarized as: enhanced training for operators, load reduction of ceramic tile processing machinery, and attention to inspection of various sealing parts. As long as we pay attention to and implement the maintenance and maintenance of the ceramic processing machinery during the running-in period as required, it will reduce the occurrence of early failures, prolong the service life, and improve work efficiency.