When we usually operate the ceramic tile chamfering machine, because the size and quality of some ceramic tiles are different, and the machine is not adjusted during the processing, the finished products of the processed ceramic tiles are not so good, so when faced with different ceramic tiles, how to adjust the machine?

   When operating the ceramic tile chamfering machine, some button operations cannot be changed, such as the three steps of turning on the machine, placing tiles, and removing tiles. Others can be adjusted according to the size and quality of the tiles, so that the quality of processed tiles is good.

1.size

  When the tile size is different, first adjust the size and enter the size to be processed on the input panel. After the tile processing equipment is automatically adjusted, put the tile in for trial processing. The finished tile is to see whether the surface is smooth after processing. Use a ruler to measure Whether the angle is neat. If there is a deviation, it needs to be adjusted again. If this situation persists after adjustment, check whether the baffle and chamfering wheels are worn out, and replace them in time.

2. quality

  When processing tiles of different quality, you need to choose the chamfering wheel consumables according to the hardness of the tile (the chamfering wheel is divided into two types: resin and steel wheel). If the general polished tiles can be processed with resin, this is selected in consideration of the processing cost. If the damage is caused by microcrystalline stone and granite, yellow steel wheels will be selected for processing.

  Different types of ceramic tile processing equipment can meet the requirements of different processing techniques, and this factor must be selected reasonably in the design. The installation of ceramic tile processing equipment is different from the center, and the meshing deviation of the large and small gears will affect the processing. Therefore, the installation must be carried out in strict accordance with the manufacturer's instructions, and then operate the tile processing equipment in accordance with the above.