In the process of using sintered stone processing machinery, many people are often unclear about the working principle of this type of equipment. They think that a large amount of dust is normal when processing sintered stones and will not have any impact on the processed plates. If there is a large amount of dust in the use of modern sintered stone processing machinery, it is abnormal. This may be because the initial debugging was not particularly good. Another problem is the consumable parts. If you do not adjust it in time,it will greatly affect the processing rate.

　　1.Consumable parts

     The application of consumables must be considered when using sintered stone processing machinery. If the consumables are inferior products, no matter how clean the processing environment is and the circulating water remains unblocked, a lot of dust may appear. So first check the quality of consumables. Before using the equipment, we should do the corresponding confirmation work. Once contaminated, we must stop using it immediately, otherwise it may cause more serious problems with our equipment.

　　 2. Re-commissioning

　　In fact, the efficiency of the sintered stone processing machine itself is relatively low, because it needs to be processed frequently. Once a problem occurs, it will have a great impact on subsequent processing. If the work efficiency is low and there is a lot of dust, there may be problems with the mechanical adjustment. It is recommended that you do the basic adjustment work before use, and be particularly careful during the processing. If you do not adjust in time after discovering the problem, a lot of plates may be wasted.

       In the application of sintered stone processing machinery, if you want to reduce the intrusion of dust, in addition to the above two points, you must always pay attention to the unobstructed circulation of the circulating water during the daily processing. If there is too much dirt in the circulating pool, you must also timely for cleaning, make sure that the water pressure is large enough when cutting the sintered stone.For more information click our official website:Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hymachinery00@gmail.com)