service

Pos: Company > News > The advantages of CNC automatic three-blade rock slab cutting machine.
NEWS CENTER

Present the latest real-time information for you

The advantages of CNC automatic three-blade rock slab cutting machine.
time : 2021-04-27 19:31 views : 31

The CNC automatic three-blade rock slab cutting machine is composed of a slicing table,transmission gearbox, speed-regulating motor and electrical control. Compared with traditional rock slab cutting machines, it has the following advantages.

CNC automatic three-blade rock slab cutting machine.

The performance and characteristics of CNC automatic three-blade rock slab cutting machine:


1. Use the control panel to adjust the speed, just input the cutting size on the numerical control panel, the machine can cut automatically, and can cut two parallel planes at the same time.


2. The blade spacing can be adjusted, and it can also be cut with a single blade, which can be used to cut various shapes of plates.


3. The CNC automatic three-blades rock slab cutting machine uses a variety of steel as the main welding material, and the front part is made of stainless steel plate, which has good rust resistance.


4. The mechanism of the CNC automatic three-blades rock slab cutting machine is compact, fully enclosed, low noise, fast forward and fast retreat, automatic retreat, stable and circling.


5. The working speed can be adjusted automatically according to the hardness of the plate during hydraulic working, which ensures the cutting quality of the rock slab,and effectively improves the service life of the diamond blade and the reliability of the whole machine.

CNC automatic three-blade rock slab cutting machine.

The operation method of CNC automatic three-blades rock slab cutting machine:


1. After the machine is installed, connect the cable connector between the console and the whole machine,and connect the external power supply of the console. The power supply is AC three-phase four-wire,and the voltage is 380V. Then check whether the rotating parts of the whole machine are flexible and whether the fasteners are loose. When the main power button is pressed, the indicators on the console panel are all bright. Then look at the direction of rotation of the host. Is it consistent with the direction marked with an arrow? Otherwise, the adjustment should be stopped immediately, and the rotation direction of other parts of the whole machine should be adjusted together with the main machine when leaving the factory. If the main machine rotates correctly, the other parts rotate correctly!


2. After all inspections are completed, the splint can be installed for cutting. When clamping the rock slab, a reliable clamping point should be selected to prevent false clamping or false clamping, so as to avoid damage to the blade and the plate due to the movement of the rock slab during the cutting process.


3. The machine adopts automatic feeding. The feeding speed is adjusted at a constant speed according to the size and hardness of the rock plate. After cutting, the pointer of the speed regulator must be reset to zero, and then the power supply must be turned off.


The CNC automatic three-blade rock slab cutting machine has fast cutting speed, accurate accuracy, high efficiency, good cutting quality, no chipping or dropping corners, straight cutting 8-10 meters per minute, adjustable size, fast operation, stable operation, convenient operation, no need the manual measuring scalen and can be operated by ordinary employees.


FOSHAN NANHAI HONGYUN CERAMIC MACHNERY CO.LTD

Tel: +86-18666532535 (Mr.Huang)

Email:hanistay@foxmail.com

Looking forward your message.


Processed in 0.040762 Second , 58 querys.