Although the automatic rock cutting machine is very time-saving, it is necessary to ensure that the height of the cutting blade from the steel plate is in the best state in order to obtain the best cutting effect and the longest service life of the cutting blade. So how should the new type of rock cutting machine be adjusted to achieve the best cutting state?

1. Handle

The height adjustment of the handle is to use the handwheel to drive the rack on the cutting torch through the gear of the rock cutting machine to adjust the height. This operation requires a certain degree of accuracy.

2. Electric button

The height adjustment method of the electric button is mainly by operating the relevant buttons on the rock cutting machine, and driving the cutting piece up and down by adjusting the motor.

3. capacitive height adjustment

Capacitor height adjustment is generally used for flame cutting. Flame cutting is matched with capacitor height adjustment. On the one hand, it can be changed according to the height of the processed material. Adjust the cutting torque to ensure that the height of the cutting blade from the steel plate remains unchanged; on the other hand, when the preheating is completed and the high-pressure oxygen is turned on for cutting, there will be slag splashing back, and the cutting blade will easily block at this time. If you adjust the height, before turning on the cutting oxygen, first raise the cutting torch, and then move the cutting torch down after the iron slag splashes back, which can reduce the blockage of the cutting parts.

4. isolated pressure height adjustment

On the one hand, the cutting speed of the rock cutting machine is fast, on the other hand, the arc is dazzling. Therefore, relying on the operator to observe the height of the cut piece from the steel plate at any time and make timely adjustments, not only the reaction speed cannot keep up, but the eyes can not bear it, and it is easy to be injured. This is especially true when the sheet is very thin. Under normal circumstances, it should be equipped with automatic arc voltage adjustment to ensure the safety of operators.

Each device has different adjustment methods, which can be adjusted according to the model of the machine. If you don't understand anything, you can contact our online customer service for related consultation.

FOSHAN NANHAI HONGYUN CERAMIC MACHNERY CO.,LTD

Tel:+86 18666532535

Email: hanistay@foxmail.com