Sintered stone processing machinery is one of the tools for processing sintered  stones. It can cut, chamfer, trim, edging, grooving, chamfering and polishing, rounding, straightening, special-shaped edging, and 45-degree beveling, angle polishing, etc., the more advanced sintered stone equipment adopts fully automatic CNC control processing. You only need to make relevant settings on the operation panel and then turn on the power switch of the motor to automatically process. The processed sintered stone is better than traditional sintered stones,have good effects and high processing efficiency. It is the most ideal equipment for sintered stone processing plants to improve production efficiency and reduce processing costs.

　　Because the sintered stone processing machinery is also a mechanical category, so you must pay special attention to it during operation. For example, for waterjet cutting machines, you should pay attention to the following points during operation:

　　 Water cutting is a kind of metal cutting with ultra-high pressure water jet as the medium. Its strong cutting ability and cutting adaptability are the main factors that attract processing manufacturers. It is important to know that waterjet cutting is a process without thermal effect, not only does not deform the material being cut during cutting, but also obtains a smooth cutting surface.

　　 As a kind of ultra-high pressure equipment, the water jet itself is strictly sealed and protected by high pressure for safety. However, in the actual application process, the operator must keep in mind the details of safe use in order to avoid malfunctions and other undesirable phenomena.

　　The waterjet cutting process mainly relies on the movement of the CNC cantilever or the gantry to drive the cutting head movement, so do not approach the CNC cantilever to avoid accidental injury. Similarly, around the cantilever of the water jet, it is necessary to avoid the presence of interferences that affect the cutting quality.

　　 For the entire waterjet, the waterjet head is the outlet of high-pressure water, which directly interacts with the material during the cutting process. Therefore, it is necessary to ensure that the cutting material has been laid flat, otherwise the cutting sand pipe is easily damaged, and in severe cases it will cause high-pressure water leakage.

      When waterjet cutting, remember to turn off the high pressure water switch or turn off the high pressure before reclaiming the material. Especially in the case of an emergency power failure, high-pressure water will remain in the high-voltage system, and the remaining high-pressure water will be sprayed out as soon as electricity is available, so do not approach the cutting head at this time for safety. After the water jet is reconnected to the power supply, the remaining high-pressure water should be removed before normal operation.

　  High-pressure pipes and superchargers are also very critical equipment for waterjets, but they are also vulnerable parts that are likely to cause high-pressure water leakage. Therefore, the sealing parts should be replaced regularly according to the operating instructions. At the same time, choosing a reasonable waterjet cutting method is also the basis to ensure the smooth completion of the waterjet cutting process.For more information click our official website:Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hymachinery00@gmail.com)