Due to the stable processing performance, high efficiency, small mechanical footprint and simple operation of the CNC sintered stone hand-push cutting machine, it has become a popular small sintered stone cutting equipment for sintered stone processing manufacturers. But no matter what kind of equipment it is, it will need to be repaired after it is permanent. The CNC hand-push sintered stone cutting machine is no exception. How about the maintenance method of the small sintered stone cutting machine? The relevant repair parts are usually disassembled before maintenance. What are the disassembly steps?

　　 1. The first step in repairing equipment is to determine the failure of the equipment, run the equipment idling without putting a sintered stone on the machine, and determine the cause of the equipment failure through various methods.

　　 2. Pay attention to safety when repairing the equipment. After determining the cause of the equipment failure, before cutting off the power supply of the equipment, various switches such as belts and motors must be turned off to prevent accidents such as electric shock during maintenance.

　　3. If there is a grounding maintenance cable in the equipment, you need to take it out and tie it with a metal rod and place it on the ground to take away the static electricity on the equipment.

　　 4. Check or disassemble suspected faulty parts. Do not use violence when disassembling, strictly follow the equipment structure to avoid further damage to the equipment, and check the degree of wear of the saw blades, belts and other equipment consumables. If it is severely worn, replace it in time.

　　 5. After troubleshooting and replacing equipment consumables, clean the grooves of the equipment rails, remove deposits, and add lubricating oil to the rails for maintenance.

　　After the above operations are completed, the equipment components, casing, etc. can be installed in the order of disassembly. After installation, turn on the power and start the test run of the sintered stone cutting machine to ensure that the equipment failure has been eliminated and whether the equipment can operate normally, so as to end the maintenance of the CNC sintered stone cutting machine.For more information click our official website:Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hymachinery00@gmail.com)