service

Pos: Company > Industry News > Instructions and precautions for the 1800 type hand-push CNC double-blade sintered stone cutting machine
NEWS CENTER

Present the latest real-time information for you

Instructions and precautions for the 1800 type hand-push CNC double-blade sintered stone cutting machine
time : 2021-07-16 10:35 views : 30

      The 1800 type hand-push CNC double-blade sintered stone cutting machine is developed and upgraded on the basis of the 1200 type hand-push CNC double-blade sintered stone cutting machine. It can cut large sintered stones up to 1.8 meters. It is an ideal large slabs cutting machine for sintered stone processing plants.the following introduces the instructions and precautions of the 1800 hand-push CNC double-blade sintered stone cutting machine.

1800 CNC hand push sintered stone cutting machine

 1800 type hand-push CNC double-blade sintered stone cutting machine instruction:


   1. When cutting, only when the bottom plate has no friction, can the cutting be carried out.


   2. Before preparing to work, please carefully check whether the cutting blade is damaged or broken, if any, please replace it immediately.


   3. The cooling water source of the saw blade is tap water. Before use, connect the water pipe to the tap, and it is best to adjust the amount of water properly.


  4. Before use, the switch should be off and the power supply should be on. Check that the power supply or voltage should be within 10% of the rated value.


  5. During operation, the feed should be stable and not excessive force. For example, when the saw blade speed drops, the feed force should be reduced to prevent overloading and damaging the machine.


   6. It is strictly forbidden to remove the protective cover for cutting. After removing the protective cover, if there is no protective measure, it is easy to damage the machine and possibly harm the personal safety of the processing personnel.

1800 hand push CNC cutting machine

 1800 type hand push CNC double-blade sintered stone cutting machine precautions:


   1. When the stone cutting machine is working, the machine body must be stable and firm on the ground, and it is strictly forbidden to work off the ground.


  2. Clean the workbench in time after the work, and release the accumulated water and sediment in the water tank after shutdown.


  3. Because the sintered stone cutting machine has a certain directionality, reverse cutting is prohibited during cutting, otherwise it will cause damage to the machine and personal safety.


   4. Prevent heavy objects from hitting the table of the cutting machine. When the machine is not used for a long time, it should be stored in a dry and clean place.


     The above are the instructions and precautions for the 1800 type hand-push CNC double-blade sintered stone cutting machine. I hope it will be helpful to you. In addition to the precautions described above, you must regularly check each bearing shaft after cleaning, add lubricating oil to the lubrication points, and replace the severely worn parts in time, etc., so that the stone cutting machine can be used for a longer time, and the processed plates are as good as always.For more information click our official website:Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hymachinery00@gmail.com)


Processed in 0.047031 Second , 59 querys.