service

Pos: Company > Industry News > How to use the tile cutter and what should we pay attention to?
NEWS CENTER

Present the latest real-time information for you

How to use the tile cutter and what should we pay attention to?
time : 2021-06-01 16:06 views : 26

        As modern society enters the age of technology, tile cutters have become one of the indispensable equipment for processing ceramic tiles. So how many do you know about the use of tile cutters? What should I pay attention to when using a tile cutter?

The hand push tile cutter

   1. Before operation, check whether the cutting blade has cracks, nicks or bends, and conduct a test run to confirm whether it is normal. If any of the above defects or abnormalities are found, stop the operation immediately and do not touch the cutting blade during operation.


  2. When cutting machine, wear work clothes and wear protective goggles. Tighten the nut, adjust the size to be cut on the ruler, and tighten the fixing screw by hand after confirmation; place the tile on the platform of the tile cutter.


      3. Put down the handle and touch the surface of the tile, gently push the handle forward to cut a continuous and even straight line on the surface of the tile, and then pull the push-pull rod to the back end, let the blade gently press on the tile and move forward along the main axis Push to the front control slot, put the box foot on the tile, lightly press the end of the push-pull handle, the tile will break with the blade mark.

1.2m ceramic tile double blade cutting machine

  Tile cutting machine precautions:


       First, The marking should be uniform, continuous and clear from beginning to end; because the ruler of the tile cutter is made of special hard alloy, so as long as you hold the handle with a small force, you can draw a very uniform line. The cutting line comes, in the process of cutting the tiles, if the line is drawn too hard, the cutting line will become jagged, which greatly shortens the normal service life of the tile cutting machine.


  Second, the saw blades used for cutting vitrified tiles and porcelain slices are different. The saw blades are not vertical and easy to bend. Cutting ceramic tiles requires fine sand saw blades. Instability or vibration of the machine will cause the blade edges to bend. The force must be light when pushing, and the cutting marks on the tiles cannot be interrupted, otherwise the tiles will still crack.


      The ceramic tile cutting machine is the latest development of Foshan Nanhai Hongyun Ceramic Machinery Co., Ltd. It is mainly used for rock slab/ceramic tile, cutting straight line, and can cut up to 3.2 meters X 1.6 meters of plates. It has high speed and does not collapse or drop corners. Features: Using H steel support + linear guide rail, and oil-immersed guide rail, the accuracy of the adjustment is within 0.1mm, the processing cost is extremely low, the cutting is stable, the porcelain is not chipped or drop corners, and the life span can reach more than 6 years. It is one of the essential products of the ceramic tile processing factory.


Processed in 0.061149 Second , 59 querys.