service

Pos: Company > Industry News > How to operate the Hongyun automatic ceramic tile cutting machine safely?
NEWS CENTER

Present the latest real-time information for you

How to operate the Hongyun automatic ceramic tile cutting machine safely?
time : 2021-05-08 17:13 views : 25

The automatic ceramic tile cutting machine adopts CNC control operation, and some problems need to be paid attention to in the operation process to make it safe to cut. So how does the automatic ceramic tile cutting machine operate safely?


1. Check whether the mechanical parts (such as saw blades, table tops, screws, chains, motors, switch buttons, etc.) are normal. If any problem is found, it should be reported to the maintenance team for repair, and the machine can be turned on after troubleshooting.

The CNC automatic ceramic tile cutting machine.

2. Saw blades with cracks, unevenness, missing teeth and blunt teeth cannot be used. When replacing the saw blade, the power supply must be cut off. The saw blade must be installed firmly, perpendicular to the center line of the shaft, and there must be no jumps during operation.


3. Check that the protective baffle is complete and effective, and shall not be dismantled or modified at will. The movable protective baffle shall not be moved at will.


4. After starting the machine, run the machine idling for 2-3 minutes to check whether the saw blade is operating normally, whether it is a test machine or normal use, the saw blade is not aligned with the saw blade when it is running. Test the machine and observe whether the supply of cooling water is normal.


5. The operator shall not leave the work post without authorization after the cutting machine is started, and must shut down and cut off the power when leaving.


6. When working, the cutting blade must be stopped for the blade setting of the saw blade, and the cutting operation can be started after the blade setting is completed.


7. When cutting, the operator is strictly forbidden to approach the saw blade or put his arms over the saw blade, and supervise other people at any time.


8. After the cutting is completed, the machine body should return to the stop position to ensure that the saw blade has entered the protective cover to prevent accidents caused by accidents caused by people inadvertently touching the saw blade that has not stopped rotating due to inertia after the stop.

The CNC automatic ceramic tile cutting machine.

9. When cutting, pay attention to observe whether the spreader above the guide bar is loose. If it is, stop and adjust it immediately to prevent the guide bar from collapsing and causing injury to the machine.


10. Clean up the sanitation of the machine tool and the ground after the work is finished. When cleaning aluminum chips, do not blow with mouth or wipe with hands. Brushes, hooks or other tools must be used to clean.


11. At the end of the work, shut down and cut off the power supply, and hang up the warning sign.


After the automatic ceramic tile cutting machine is finished working, clean up the sanitation on the workbench and the ground in time, and regularly do a maintenance and lubricate the machine. If you still don't understand anything, you can also consult our online customer service.


Processed in 0.038148 Second , 59 querys.