Sintered stone is a new type of decoration material. It can produce a variety of sintered stone products, such as sintered stone dining table,cabinet,countertop, sink, etc.The products all require certain sintered stone processing technology. Here's how to deal with the seamless splicing process of sintered stones.

　  How to deal with the seamless splicing of sintered stones?

      1. When processing sintered stone products, some products are right-angled, such as bathtubs, wash basins, middle islands, cabinet corners, etc., all need to be cut at 45 degrees, and the 45-degree cutting angle of the sintered stone is required to be accurate. The incision should be flat, so Hongyun sintered stone machinery Factory adopts the industry's leading automatic CNC cutting and grinding machine, which can adjust the angle at will, the size and specifications are not limited, the incision is flat, the splicing is beautiful and flawless, and the splicing is truly seamless.

　　2. Seamless splicing means that a sharp corner is formed with the glaze surface when a 45 degree chamfer is formed, and 0 is left for the corner to be touched. When using a machine for cutting when edging, it is inevitable that there will be some flaws, so after the edging is finished, a second polishing inspection is required by hand.

　　3. Before pasting, clean the sintered stones, dry the water, check the size and quality of the drawings, and make a set of fixtures to position the sintered stones to ensure the straightness and beauty of the finished product.

　　After positioning the sintered stones that need to be spliced, put professional sintered stone glue into the interface position, and then use cloth tape to stretch the interface to increase the seamless splicing effect

　　 4. After the glue has dried for 20-30 minutes, use a sponge or angle grinder, sandpaper and other tools to polish off the excess glue

        5. After the above four processes are completed, the reinforcement needs to be reinforced with special edge strips or corner codes and other materials to reinforce the back of the adhesive interface to increase the bonding strength and stability of the adhesive to prevent peeling and cracking. problem.

　　  6. Finally, wipe the interface with antifouling agent to make the interface more beautiful.

        The above is the introduction of how to deal with seamless splicing of sintered stones. If you have more professional needs, please contact our 24-hour online customer service (86)15278353800(Whatsapp). The business manager will recommend the right equipment for you according to your needs. Welcome dear new and old customers call for consultation.