We all know that the processing principle of the sintered stone bridge cutting machine is to set the relevant size on the control panel and then start the motor, which is pushed on the cutting blade by the conveyor belt to achieve the purpose of cutting sintered stone. Because the sintered stone bridge cutting machine is a high-precision sintered stone processing equipment, it can be debugged if you want to process the sintered stone with ideal results.

       Before debugging the sintered stone bridge cutting machine, we must first understand the general performance of the machine. For example, the 3200 sintered stone bridge cutting machine adopts numerical control size adjustment (imported ball screw linear guide device) and automatic knife retraction (double linear guide teeth, gear structure). The forward direction of the cutting machine head is generally a straight line, but there will be a certain deviation in some positions. It is these deviations that affect the cutting effect of the equipment. In order to correct these tolerances, it is necessary to first test the deviation of a specific device.

　　The debugging method of the sintered stone bridge cutting machine:

　　 1. It is necessary to install professional measuring equipment on the cutting machine head to measure the deviation.

　　 2. without opening the cutting head, use the processed straight-edged plate to test run the equipment at low speed, and observe and record the numerical changes of the measuring equipment during the slow advancement of the cutting head.

　　 3. After testing the deviation of the equipment, use professional tools to fine-tune the specific deviation position of the equipment. After fine-tuning, try running the equipment again, observe the measuring equipment, and confirm the debugging results. If there is still a deviation, fine-tune again until the equipment can cut the ideal straight edge.

　　4. After the debugging of the above points, the performance debugging of the equipment is completed, and then the other parts of the equipment are debugged to make it run more smoothly.

      The above is the debugging method of the sintered stone bridge cutting machine. In sintered stone machinery manufacturers, if it is a relatively large equipment, usually personnel will be arranged to install and debug it, if it is a small sintered stone machinery and equipment, it will generally be debugged before shipment to customers for use, but if customers want to debug by themselves, they can refer to the points introduced above according to the model of the machine.For more information click our official website:Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hymachinery00@gmail.com)