service

Pos: Company > Industry News > Daily inspection and maintenance plan of porcelain slab processing machinery and equipment
NEWS CENTER

Present the latest real-time information for you

Daily inspection and maintenance plan of porcelain slab processing machinery and equipment
time : 2021-07-24 14:48 views : 47

     In the daily maintenance work of porcelain slab processing machinery and equipment, it is necessary to check the stability of various parts, the sensitivity of lubrication and control instruments. The staff must operate strictly in accordance with the regulations, regularly check whether the equipment can operate normally, and take moisture-proof measures, etc. The following is a specific introduction to the daily inspection and maintenance plan of porcelain slab processing machinery.

Automatic porcelain cutting machine

    1. The main items of the daily inspection of the equipment are: check the complete parts of the equipment; each rotating system runs normally and smoothly, the speed is complete and flexible, no noise, no over-temperature and over-pressure; complete lubrication system, unobstructed pipeline, eye-catching oil standard, and oil quality meets the equipment requirements; the sliding parts operate normally, and the sliding working surface and parts are not severely pulled, bumped or pressed. ; The equipment has no oil leakage, water leakage, air leakage, or material leakage; whether the control system and testing instruments are sensitive and reliable; the cooling and heating system is well-equipped, unobstructed, and working normally; the electrical and control systems are well-equipped, and the pipelines are complete; the safety protection devices are complete, Complete and reliable; equipment parts and special tools are complete, and rust-free, and keep them properly.


 2. When operating a porcelain slab processing machine, the operator should strictly abide by the operating procedures and be familiar with the various properties of the machine. Operate the equipment carefully according to the parameters during operation, and strictly prohibit over-temperature, over-pressure and overload operation.


   3. The operator should keep a record of relevant inspections. If there are any abnormalities, even notify the relevant personnel to deal with it. Regularly check the machine safety guard and the fastening of each part to ensure that they are fastened in place; check and clean the large and small gears, shafts and bearings, remove impurities, dredge the oil holes, add new oil regularly; check the gear mesh and belt tightness, and make appropriate adjustments respectively; check and adjust the clutch brake device; check whether the electrical components are tight and intact to ensure that the work is sensitive ,precise.


 4. clean up the dust in the porcelain slab processing machinery and equipment motors and electrical boxes, which can effectively prevent the dust generated during porcelain slab processing from attaching to the circuit board and affecting the normal operation of the equipment.


 5. Take precautions related to moisture and corrosion, and be sure to avoid long-term exposure of wires and electrical components to water or humid environments. Keep all parts clean and free of moisture. After the work is completed, all parts of the machine are dried to prevent moisture and rust.

Manual porcelain slabs cutting machine

 6. Regularly replace new blades, polishing wheels, grinding heads and other parts. After replacement, check whether they are installed in place, and then try the machine again.


 7. The maintenance of the machine must be carried out after the machine is cut off and stopped.


 With the continuous development of my country's mechanical technology, the porcelain slab machinery is developing in a technology-intensive direction such as high-speed, automation, and computerization. Advanced equipment is indispensable for repair and maintenance. Doing a good job in the repair and maintenance of machinery, the normal operation of equipment, the maintenance of equipment performance and accuracy, the extension of equipment service life and the safe use of machinery play a decisive role in ensuring product quality and improving production efficiency.For more information click our official website:Foshan nanhai hongyun ceramic machinery company.If you are interested in this machine,please contact me in Whatsapp or email(whatsapp number:+86 152 7835 3800;email:hymachinery00@gmail.com)




Processed in 0.038461 Second , 59 querys.